Leak-Sealing Technology

Leak-Sealing Technology

Intelligent Leak Repair Products

Straight

Fabricated from 100% solid steel plate. No welding involved which eliminates the need for NDT and PWHT procedures. These off-the-shelf connectable enclosures are available in both perimeter and void fill options with built-in strong backing capability. Available in sizes ranging from ½” to 12” and standard and extended lengths; designed for use up to 650 psig at 700˚ F. A standard engineering calculation package accompanies each enclosure. Please note, as the system operating temperature decreases, the allowable pressure for the enclosure may increase.

90˚ Elbow

Fabricated from 100% solid steel plate. No welding involved which eliminates the need for NDT and PWHT procedures. These off-the-shelf connectable enclosures are available in both perimeter and void fill options with built-in strong backing capability. Available in sizes ranging from ½” to 8” and standard and extended lengths; designed for use up to 650 psig at 700˚ F. A standard engineering calculation package accompanies each enclosure. Please note, as the system operating temperature decreases, the allowable pressure for the enclosure may increase.

45˚ Elbow

Fabricated from 100% solid steel plate. No welding involved which eliminates the need for NDT and PWHT procedures. These off-the-shelf connectable enclosures are available in both perimeter and void fill options with built-in strong backing capability. Available in sizes ranging from ½” to 6” and designed for use up to 650 psig at 700˚ F. A standard engineering calculation package accompanies each enclosure. Please note, as the system operating temperature decreases, the allowable pressure for the enclosure may increase.

Tees

Fabricated from 100% solid steel plate. No welding involved which eliminates the need for NDT and PWHT procedures. These off-the-shelf connectable enclosures are available in both perimeter and void fill options with built-in strong backing capability. Designed for use up to 650 psig at 700˚ F. A standard engineering calculation package accompanies each enclosure. Please note, as the system operating temperature decreases, the allowable pressure for the enclosure may increase.

Custom Configurations

Fabricated from 100% solid steel plate. No welding involved which eliminates the need for NDT and PWHT procedures. These connectable enclosures are available in both perimeter and void fill options with built-in strong backing capability and can be designed for unique parameters and service conditions. An engineering calculation package will be provided detailing the design parameters.

Connector

Fabricated from 100% solid steel plate. No welding involved which eliminates the need for NDT and PWHT procedures. These patented hub connectors are injectable and are designed to continue the perimeter seal along the entire length of the repair regardless of how many enclosures are attached together. Please note, if the scope of the work should change, additional enclosures may be added at a later date.

Strong Backs

Fabricated from 100% solid steel plate. No welding involved which eliminates the need for NDT and PWHT procedures. Single or multiple strong backs are designed to be connected to the enclosures through use of the patented hub and may be installed as needed. An engineering calculation package will be provided, detailing the strong backing design parameters.

Pressure Seal Flange Clamps

Fabricated from 100% solid steel plate. No welding involved which eliminates the need for NDT and PWHT procedures. All pressure seal flange clamps have built-in convertible strong backs and are of triple groove design. Safely hot bolt flanges on critical processes. Prepare flanges for blind replacement during turnarounds. Safely change out studs, even on four-bolt flanges. Many sizes and pressure ratings are available.

 

Product 1
Product 2
Product 3
Product 4
Product 6
Product 7
Product 8
Product 9
Product 10
Product 11
Product 12